Working Place:
On Board - Job Position:
Engine Staff / Crew - Persons to hire:
MHG is currently recruiting for the following positions:
- ETO
- 2nd / Engineer
- FTR
Ukraine or Myanmar CVs
Dry cargo, container, or general cargo experience
Please apply by sending your CV by message
Working Place:
On Board - Job Position:
Other Staff / Crew - Persons to hire:
MHG is currently recruiting for the following positions:
VOA/COA
Purpose of the Job:
To ensure that crane working list is always followed unless otherwise advised, to guide crane operator, and lashing gang, relate closely with vessel command and to follow crane work list, loading sequences, check condition of containers, seal, and guide tractors for proper positioning under cranes etc.
Qualification / Capabilities:
Working Conditions:
Outdoor on vessel and inside QC cabin
Skills / Attribute:
Language & technical skills are mandatory to allow the employee to update the container details via VMT.
Required Experience:
Terminal knowledge and experience, minimum 02 years.
Area of Contribution
Work Arrangement
➢ Take over paperwork from outgoing colleagues or documents for incoming vessel from vessel team leader.
➢ Proceed to assigned crane and plan next move.
➢ Take the workplace as VOA or COA according to assigned location by team leader.
➢ Check SVD manager assigned allocation (T01 | T02).
➢ Be available on time on the assigned location.
➢ Take Zello and sign on sign sheet.
➢ Take the required signage for onboard assignment.
➢ Take Zello and sign on sign sheet.
➢ Take the required signage for onboard assignment.
➢ Prepare crane log to start crane updating.
➢ GMPH Main Berth
➢ GMPH R4
➢ Berth Productivity (>3.5 CI)
➢ Service Failure
Vessel & Crane Operation Assistant – On Vessel & Inside QC Cabin
During discharge operations observe the following
➢ Check units for damage and inform vessel team leader for further action, or place container at quayside or guide Tractor to any special area assigned for such units.
➢ Check if extension wires of reefer plugs are proper secured to avoid any damage.
➢ Check of any other exceptions i.e. incorrect container no's etc and if noted immediately bring it to the notice of vessel team leader and control for further action.
➢ In case not manifested containers have to be discharged as per their stowage place them on quayside or guide tractor operator to any special area for such containers.
➢ During discharge of special lifts which cannot be discharged to normal tractors, guide to ensure safe discharge on to low bed or pre-arranged safe area.
➢ Follow crane work list unless otherwise advised by vessel team leader or control
During Loading operations observe the following.
➢ Check condition of containers prior to lift off by crane and report any exceptions to vessel team leader for further action.
➢ Follow loading sequence per crane working list unless otherwise advised by vessel team leader or control.
➢ Update all moves thru RDT.
➢ Guide tractor drives regarding positioning of vehicles during discharge/load operations.
➢ Ensure that all are without twist locks prior to moving to stacking area.
Working Place:
On Board - Job Position:
Other Staff / Crew - Persons to hire:
MHG is currently recruiting for the following positions:
Lashing & Conning Assistant
Purpose of the Job:
To perform lashing, mooring and coning activities in a team of 4 workers per Quay Crane during vessel operations. To also assist in the coordination and monitoring of the loading and unloading of containers to and from the vessel. To guide and position the terminal tractor when necessary.
Qualification / Capabilities:
Working Conditions:
Working outdoor at Quayside.
Skills / Attribute:
➢ Conning & Un conning for vessel lock.
➢ Working onboard.
Required Experience:
Work experience as vessel operation LCA minimum 01 years.
Key Accountabilities / Responsibilities:
Area of Contribution
Work Arrangement & Preparations
➢ Wear full PPE.
➢ Prepare safety harness if required the clamping.
➢ Be ready at assigned location
➢ Take the assigned place based on supervisor instructions.
➢ Follow safety rules
Quayside Assignments
➢ Helping with activities related to the maintenance and operation of port equipment and the loading and unloading of vessels
➢ Performing assigned work in a timely and professional manner and according to instructions.
➢ Carrying out all work safely and in accordance with company and port rules and regulations.
➢ Carrying out any other duties or assignments as required from time to time by supervision or management.
➢ Be in proper position prior to the vessel arrival to tide rope and ensure vessel is properly secured from any obstruction.
➢ Ensure the lashing bar and the related twist lock is in good condition to conduct the job.
➢ Communicate with concerned foremen to avoid further problem if required.
➢ Ensure all the lashing bars are properly engaged with container before completion of vessel.
➢ Prepare double up of containers as per operations requirement.
➢ Yard and wharf side painting and cleaning when assigned.
➢ Ensure those twist lock using for vessel are in safe position.
➢ Stuffing and un-stuffing of containers when assigned
Working Place:
On Board - Job Position:
Other Staff / Crew - Persons to hire:
MHG is looking for a HSE auditor for ISM/MLC/ ISPS audit onboard.
Location: Europe (work remotely with travel to vessels as needed)
Responsibilities:
- Conduct audits to ensure compliance with international and local HSE and maritime safety regulations, specifically ISM/MLC/ISPS codes, onboard the company's fleet.
- Collaborate with other departments and teams to promote a strong safety culture and improve HSE performance.
- Provide support and guidance to fleet personnel on HSE matters, including training and coaching.
- Develop and implement HSE-related policies and procedures to ensure compliance and promote best practices.
- Investigate incidents and accidents to identify root causes and recommend corrective actions to prevent recurrence.
- Keep up to date with relevant industry standards, regulations, and best practices and share knowledge with the organization.
Qualifications:
- Master's degree or experienced Chief Officer who has sailed on LPG carriers.
- Knowledge of ISM/MLC/ISPS codes and regulations.
- Strong communication and interpersonal skills to build relationships with both internal and external stakeholders.
- Ability to work independently and as part of a team to achieve common goals.
- Willingness to travel to vessels as needed to perform audits and support the fleet.
- Fluent in English, both written and spoken.
Working Place:
On Board - Job Position:
Other Staff / Crew - Persons to hire:
MHG is currently recruiting for the following positions:Quay Crane Operator
Purpose of the Job:
To ensure the safe and efficient unloading of vessels in line with RSGT operating and performance standards. Accuracy counts in operator jobs. You must be able to concentrate and be precise in your work.
Qualification / Capabilities:
Working Conditions:
Equipment operator in terminal berth
Skills / Attribute:
➢ Cranes speed rules.
➢ Handling container in safe manner
➢ Capable to achieve the required target
Required Experience:
Quay crane experience in terminal, minimum 4 years.
Area of Contribution
Equipment Operation- Arrangement
➢ Check SVD manager assigned allocation (T01 | T02).
➢ Punctual on work timing & at assigned location.
Equipment Operation- Preparations
➢ Undertake thorough checking of equipment before starting to work. (Includes spreader – flipper and other switches).
➢ Check cabin cleaning and all facilities before operation.
Equipment Operation- Performance
➢ Loading and unloading containers to / from trailers.
➢ Full knowledge in handling of spreader hoisting / lowering and appropriate use of flipper guide.
➢ To ensure that, the correct positioning of gantry and working bays
➢ To ensure that the crane is properly secured with ground anchorage after completion of operations.
➢ To communicate with assigned Tally/Hatch men for smooth vessel operations.
➢ Work to agreed operating and performance standards
➢ Always maintain safe working practices
➢ To undertake other duties as needed and directed by the Team Leader
➢ Able to operate with 35Mph for achieving target.
Working Place:
On Board - Job Position:
Engine Staff / Crew - Persons to hire:
.
MHG is looking for Reefer Tech.
Purpose of the Job:
Check temperatures on a regular basis; report any exceptions to supervisor for further action, plugging and unplugging of containers, repairing of reefer malfunctions and high temp RF units reporting to the supervisor in time etc.
Key Accountabilities (duties and responsibilities):
Report for duty on timing and take over duties from outgoing Reefer Assistant.
Report to Reefer supervisor for further instructions and receive new list if any
Monitor the Rf units and update the temp regularly as daily 8 hrs.
On berthing of vessels proceed to planned positions and plug in units upon arrival.
Plug in Full exports as soon as they are received from outside or stuffed in yard.
Unplug units for loading only on the instructions of control operations officers Vessel team leader
Unplug units for delivery only on the instructions of control operations officers.
Keep the tools and reefer related materials in right position when requires.
Keep reefer bays and plug sockets clean and sound condition if any damages found reported to the supervisor.
General Duties of All Employees
To comply and adhere to Human Resource policies, procedures, rules and regulations.
To comply and adhere to Health Safety and Security policies, procedures, rules and regulations.
To comply and abide by the Company’s Code of Business Conduct & Ethics.
To comply and adhere to ICT policies, procedures, rules and regulation.